You have 0 items in your cart.
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
DAK001-DIK-5553 PUSH-CONE SOIL HARDNESS METER (SOIL MOISTURE METER) - MADE IN JAPAN | This device measures a resistance of soil easily by pushing a cone vertically into the profile scrapped evenly. Measuring range 0 - 40mm (0 - 49MPa) Cone angle ‹ 20' Strength of spring 78.4N/40mm Outside dimensions L225mm x diam.40mm A case is attached. @ Weight 250g Total weight Approx370g ( Main unit 250g ) | Hardness tester |
|
|
|
DAV001-WEATHER STATION (WIRELESS) 6152UK - MADE IN USA - 1 YR WARRANTY | KKI DAV001 with Standard Radiation Shield transmits and receives data from up to 1,000 feet away (line-of-sight) - that's more than three football fields in length! KKI 6152 Wireless Vantage Pro2 with Standard Radiation Shield transmits and receives data from up to 1,000 feet away (line-of-sight) - that's more than three football fields in length! This high-tech wireless weather station has all the features that made the original Vantage Pro so famous, yet adds more such as button... | Datalogger/Recorders |
|
|
|
DAV004-WEATHER STATION 6152CUK (WIRED) WITH STANDARD RADIATION SHIELD. R- MADE IN USA | Cabled unit with Standard Radiation Shield has all the reliable features of the original unit but incorporates many additional improvements! This cabled weather station is an upgraded version of the original system. It includes 100 feet of cable running from the integrated sensor suite to the console. | Datalogger/Recorders |
|
|
|
DAV005-WEATHER STATION (WIRELESS) 6162UK WIRELESS WEATHER STATION WITH UV & SOLAR RADIATION SENSOR-USA MADE | This unit comes with UV and Solar Radiation Sensors retains all the reliable and accurate features of the DAV005 and adds even more! The Weather Station with Standard Radiation Shield transmits and receives data from up to 1,000 feet away (line-of-sight) - that's more than three football fields in length and quite an improvement over the original DAV005 figures! The KKI DAV005 Plus Weather station adds two additional sensors to the standard DAV005 set - an ultraviolet (UV) sensor to... | Datalogger/Recorders |
|
|
|
DEN810-DENT USA RECORDING POWER METER WITH WIFI AND ANTENNA | Allow you to download data without opening the switch or junction box cover. Any one can steal your power meter until you have this! >> Measures, Stores and Analyzes 144 Different Electical Parameters Including Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAR), Kilowatts (kW), Kilowatt Hours (kHW), Power Factor and Harmonics through 63rd | Power analysers/Power meters |
|
|
|
DER001-DE-5000 SMART LCR METER (UP TO 100 KHZ) C/W TL-22 SMD TWEEZER | ISO 9001 • Auto L.C.R. check• 100 / 120 / 1k / 10k / 100k Hz test frequency• 20,000 / 2,000 counts display• Backlit• Ls / Lp / Cs / Cp / Rs / Rp / DCR with D / Q / θ / ESR measurement• Relative mode• Series / Parallel modes• Components sorting function *Selectable tolerance ±0.25%, ±0.5%, ±1%, ±2%, ±5%, ±10%, ±20%, -20% +80%• Low battery indication• Optical IR to USB PC link (optional) | LCR meters |
|
|
|
DER012 Water-Proof Thermometer Display | Feature: -Water-Proof --30c to +70c -High Accuracy | Thermometers |
|
|
|
DER013 Water-Proof Thermometer Display (with 50cm temp cable) | Feature: -Water-Proof --30c to +70c -High Accuracy | Thermometers |
|
|
|
Desktop Refractometer T3-BX/RI | Brix 0.0 to 18.0% Refractive Index 1.3300 to 1.3605 | Analog refractometers |
|
|
|
DKK- TOA CLD-7M | Measures chloride demand of water and estimates chlorine injection level; best suited for feed forward control Meas. range From 0 - 5 mg/L to 10 mg/L （ppm） From 0 - 10 mg/L to 20 mg/L （ppm） | Chloride Demand Analyzer |
|
|
|
DKK- TOA CLF-1610 | Measures free residual chlorine of clean water continuously with the reagentless polarographic method RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 1/2, 0 - 1/3, 0 - 2/3 mg/L (ppm) (2-range) | Reagentless Free Chlorine Analyzer |
|
|
|
DKK-TOA A5/A6 Series | Hermetically sealed 2-electrode type detector featured with excellent heat-proofing and pressure tightness Pipeline-insertion/immersion/flow-through/throw-in/leadless, etc. type available Four types of cell constants available: 0.01, 0.1, 1.0, 10 cm-1 Meas. range Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm | Industrial Conductivity Detector |
|
|
|
DKK-TOA AA-1(for Standard) / AA-2 (for Ultrapure Water) | Single-function (no indication) conductivity analyzer for field installation Easy installation for the one-unit amplifier and detector Output: 4 - 20mADC Power supply: 100VAC Meas. range AA-1: 0 - 2 μS/cm to 0 - 10000 μS/cm AA-2: 0 - 0.2/0.5/1.0 μS/cm | Conductivity Detectors with Amplifier |
|
|
|
DKK-TOA ABT-511 | Automatic Burette ABT-511 Precising dispensing system (stable quantitation and speed) Titration burette (manual titration) supported GLP compliance Sampling mode loaded(measure/dilution) RS-232 equipped as standard specification | Automatic Titrator |
|
|
|
DKK-TOA AF-100 | Enables bacteria and cell measurements in 50 sec. Highly sensitive measurement at 1 - 1000 cells/mL level Enables direct measurement of membrane filter Compliant to sanitary management by swap test Useful functions such as ATP concentration and cell converted value available Automatic reagent dispenser is optional (DF-10 sold separately) | ATP Analyzer |
|
|
|
DKK-TOA ALF-1600 | Continuous measurement of alkalinity data in water purification process by coulometric titration method Requires only 1/4 reagent volume of existing model RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 50/100 mg/L (ppm) (2-ranges) | Alkalinity Analyzer |
|
|
|
DKK-TOA AQM-100A | Resistivity Analyzer for Ultra-Pure Water AQM-100A Compact DIN 96 size Best suited for water quality control in ultra-pure water production lines Two detectors connectable Meas. range 0.00 - 20.00 MΩ・cm | Panel Type Resistivity Analyzer for Ultra-Pure Water |
|
|
|
DKK-TOA AQM-210A | Panel Type Resistivity Analyzer AQM-210A Compact DIN 96 size Best suited for water quality control in ultra-pure water production lines Two detectors connectable RS-232 equipped as standard specification Output: 2-channel, insulated, 4 - 20mA Meas. range 0.00 - 20.00 MΩ・cm | Panel Type Resistivity Analyzer for Ultra-Pure Water |
|
|
|
DKK-TOA AR4/AR5 Series | Compact 2-electrode type (titanium) detector designed for ultrapure water Pipeline insertion type, leadless type Two types of cell constants available: 0.01, 0.1 cm-1 Meas. range 0 - 20/200 MΩ·cm 0 - 0.2/2 μS/cm | Industrial Conductivity Detector |
|
|
|
DKK-TOA AUT-701 | Dual system allows for 2-channel simultaneous titration Strong&Float high performance electrodes USB(Host) and LAN equipped as standard specification Validation supporting function Turntable, auto-sampling system and etc. connectable | Automatic Titrator |
|