You have 0 items in your cart.
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
GW INSTEK GSG-120 | Features *Freq Range 100kHz ~ 110MHz *Output Level -19 ~+99 dBu *All Operations are Controlled by Microprocessor *Memory Storage: 10 points in one block(up to 100 continuous points) *and 4 output levels *Memory Data Copy *Back Space key *Remote Control Function(Need the GRC-1201 option) *FM Stereo Modulation (GSG-122 only) | Other Signal Sources |
|
|
|
GW INSTEK GAG-810/809 | Features *Frequency from 10Hz ~ 1MHz *0.02% Low Sine Wave Distortion (GAG-810 Only)*6 Steps Output Attenuator *EXT SYNC Function | Other Signal Sources |
|
|
|
GAS DNA GMS1000 Single -Channel digital controller for gas detector | GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily... | Digital Controller |
|
|
|
GAS DNA GMS1500 4-Channel digital controller for gas detector | GMS-1500 is four channel digital controller which can be connected to four (4) gas detectors. Receiving analogue continuous signal from four (4) detectors and converting it into digital signal, GMS-1500 provides various alarming and monitoring environment by micro-processor. Also, GMS-1500 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can... | Digital Controller |
|
|
|
GAS DNA GMS 2000 Multi-channel digital controller for gas detector | GMS-2000 is multi-channel digital controller to monitor gas leakages from more than one gas detectors simultaneously. GMS-2000 is composed of one alarming unit & more than one receiving units. While each receiving units in GMS-2000 receive density signals from external gas detectors, when the density becomes higher than alarm value, receiving units automatically give signal to alarming unit to sound alarm. GMS-2000 transmits the relay output and standard current output signal 4-20㎃ to... | Digital Controller |
|
|
|
GW INSTEK PCS-1000 | Features - 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB | Precision Current Shunt Meter |
|
|
|
GW INSTEK APS-1102A | Features : - 5.7" Large LCD Display- Output Capacity: 1kVA(for AC 200V Input)- Output Modes: AC and AC+DC Combined with any of four signal sources- Signal Source: Internal(INT),External(EXT),Internal+Externl(ADD)and Sychronization(SYNC)- Arbitrary Waveform Power Output- Power Amplifier of External Signal- Measurement Functions: Voltage, Current, Power ,Frequency, PowerFactor,CF,and Harmonic Current- Capacitor Input Load Supported- Sequence Function Allows Programming of Output Patterns-... | Programmable AC / DC Power Source |
|
|
|
GW INSTEK AC power supply APS-1102 | Features : AC power supply(Power Supplies5.7”large LCD displayVarious output modes and measurement functionsAC-superimposed DC outputCapacitor input load supportedSequence functionLimiter function30 Sets of SAVE / RECALL memoriesUSB(USBTMC)standard for remote controlOutput On/Off FunctionAC power supply | Programmable AC / DC Power Source |
|
|
|
GW INSTEK PEL-3000 Series | Features : -Operating voltage (DC)：1.5V~150V-Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV -Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)-Support of High Slew Rate：Max 16A/us-Run Program Function（GO/NO GO Test）-Sequence Function for High Efficient Load Simulations-Commands are compatible with Kikusui PLZ-4W model.-Dynamic(Switching) Function：0.0166Hz ~20kHz-Soft Start Function：Off / On(1~200ms, Res：1ms)-Adjustable OCP / OVP / OPP / UVP Setting... | Programmable DC Electronic Load |
|
|
|
GW INSTEK PEL-2000 Series | Features: -Sequence function to do high Efficient load simulations-Flexible configuration with mainframes and plug-in modules-Multiple independent load inputs up to 8 channels in a mainframe-Parallel connection of inputs for increased load capacity-Parallel connection of inputs for static and dynamic tests-Multiple channels run for dynamic tests under one clock control -Maximum rated power for low range high resolution CC tests-Von setting and Von on/off for start-up Von tests-Program mode to... | Programmable DC Electronic Load |
|
|
|
GW INSTEK PPS-3635 | Features: Easy Operation with UP/DOWN Key High Resolution: 10mV, 1mA Over Voltage Protection, Over Current Protection by Hardware 100 Sets of Memory Self Test and Software Calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Time Setting FRONT/REAR Output and Sense Switch Selectable IEEE-488.2 and SCPI Compatible Command set Labview Driver Software High Stability, Low Drift 4 Digit Display | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK PPE-3323 | Features: Easy operation with UP/DOWN key High resolution: 10mV, 1mA Over voltage protection, over current protection by software 50 Sets memory Self test and software calibration Meets UL, CSA, IEC safety regulation Auto step running with timer setting Triple output Auto tracking RS-232 communication High stability,low drift 4 digit display | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK PPH-1503 | Features: -Dual Range Output (0~15V/0~3A) or (0~9V/0~5A)-3.5 Inch TFT LCD Display-Constant Voltage and Constant Current Operation-Built-in DVM Measurement Function-High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for 5mA Range)-EXternal Relay Control Output On/Off-Sink Current Capability (Maximum:2A)-Digital Panel Control-Selectable Output and Input (DVM) Ports From Front or Rear Panel-Key Lock Function-5 Sets of Preset Memory Including Power Output ON/OFF States-High Speed... | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK PPT Series | Features: Easy operation with UP/DOWN key High Resolution: 10mV, 1mA Over voltage protection, over current protection by hardware 50 Sets memory Self test and software calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Timer Setting FRONT/REAR Output and Sense Switch Selectable Triple Output Auto Series and Parallel Operation Auto Tracking IEEE-488.2 and SCPI Compatible Command set Labview Driver Software Available High Stability, Low Drift 4 Digit Display | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK PST Series | Features:Digitized programmable interfacehigh resolution 10mV, 1mA 192 x 128 LCD display, simultaneously Over-voltage, over-current, over temperature protection Intelligent fan control (changes by output power) 100 Sets memory Auto step running with timer Provided auto series and parallel function Labview driver Standard interface: RS-232C Optional: GPIB (IEEE-488.2) Optional European jack type terminal | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK PSS Series | Features: Digitized Programmable Interface High Resolution 10mV, 1mA High Stability, Low Drift Over-Voltage, Over-Current, Over Temperature Protection Intelligent Fan Control (Changes by Output Power) Built-in Buzzer Alarm Labview Driver Standard Interface: RS-232C Optional Interface: GPIB (IEEE-488.2) Optional European Jack Type Terminal | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK PSM Series | Features: Single Output Dual Range Max. 200WHigh resolution: 1mV/1mA0.01% load/line regulation, 350uVrms rippleAuto step runing with timer setting and 100 Sets memorySafety design: OVP,OCP & OTP;Output ON/OFF controlSelf-test and software calibrationHighly visible vacuum-fluorescent displayFront and rear output terminalStandard interface : RS-232C, GPIBOption : European Jack Type Terminal | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK GPD-Series | Features: 2/3/4 Independent Isolated Output4 LED Display Sets: 3 digits after decimal point Minimum Resolution : 1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S)100mV/10mA(GPD-3303D)Digital panel control(rotary encoder Switch, rubber key with indicator) User-friendly operation, coarse/fine volume control 4 Sets Save/Recall Key-Lock Output on/off Tracking Series and Parallel mode Smart cooling fan achieving low noise USB Standard InterfacePC Software & USB Driver Labview driver | Programmable Linear D.C. Power Supply |
|
|
|
GW INSTEK GPS-x303 Series | Features: 4 Independent Isolated Output Four "3 Digits" LED Displays 0.01% Load and Line Regulation Low Ripple and Noise Tracking Operation and Auto Series/Parallel Operation Output ON/OFF Switch Output Voltage and Current Setting When Output Disable Fan Speed Control Circuit to Minimize Fan Noise Over Load and Reverse Polarity Protection Optional European Jack Type Terminal | Linear DC Power Supplies |
|
|
|
GW INSTEK GPR-U Series | Features: 0.01% High Regulation Constant Voltage and Constant Current Operation Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digits 0.5" LED Display Application for Material and Products Aging Built-In Overvoltage and Overcurrent Tripped Crowbar Ten-Turn Potentiometer | Linear DC Power Supplies |
|