You have 0 items in your cart.
Products
By Brands
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
GW INSTEK GDS-1000-U Series | Features * 100/70/50 MHz Bandwidth with 2 Input Channels* 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling * 4k Memory Length per Channel * Peak Detect as Fast as 10ns * Save/Recall of 15 Front Panel Settings & Waveforms * 5.7" TFT Color Display * 19 Auto Measurements * Arithmetic Operators - Add, Subtract, FFT * USB Port for PC Connection* Data Logger * Limited Lifetime Warranty | Digital Oscilloscopes |
|
|
|
GW INSTEK AFG-3000 Series | Features * Wide frequency range from 1uHz to 80/50MHz* High 200MSa/s sampling rate * 16-bit Amplitude Resolution* Output from any section of 1M-point-long waveforms* 4.3" high resolution LCD display/on-screen help/Impedance switch* Four ways to generate arbitrary waveforms: Front Panel Operation CSV file uploading, Direct Waveform Reconstruction (DWR), ArbitraryWaveform Editing PC Software * USB, RS-232, GPIB interface support | Arbitrary Function Generators |
|
|
|
GW INSTEK GTL-205 | Features: Temperature probe adaptor with thermocouple (K-type)Length : approx. 1000mm ※ Suitable for : GDM-8261A/8255A/8251A/8342 | Test Leads / Cables / Probes |
|
|
|
GAS DNA GMS1000 Single -Channel digital controller for gas detector | GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily... | Digital Controller |
|
|
|
GAS DNA IR-20 Non-Contact Fixed Infrared Thermometer | IR-20 non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA). It can measure from 0 ℃ to maximum 400℃ in the distance of 10:1 D:S (Distance to Spot). Emissivity is 0.95 (fixed). | Fixed Infrared thermometer |
|
|
|
GW INSTEK PCS-1000 | Features - 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB | Precision Current Shunt Meter |
|
|
|
GW INSTEK GDM-8261A | Features: ※ 6 1/2 Digit Display：1,200,000 counts※ DCV Basic Accuracy：0.0035%※ Dual Measurements to perform two selected measurements simultaneously※ Bright Vacuum Fluorescent Display (VFD)※ Provide AC+DC Voltage or Current Measurement Functions※ 11 Measurement Functions & 10 Math Functions※ High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements※ Temperature Measurement (RTD & Thermocouple) from -200°C ~ +1820°C ※ High Transmission Speed: Up to 2,400... | Digital Meters |
|
|
|
GW INSTEK GDS-1000A-U Series | Features * 150/100/70MHz Bandwidths* 1GSa/s Real-Time Sample Rates Maximum, 25GSa/s Equivalent-Time* 2Mega Points Record Length* 2mV~10V Vertical Scale* 1ns~50s Horizontal Range* Up to 27 Automatic Measurements* 5.7" TFT LCD Display* USB Host and Device Interface Supported* Go/NoGo Function* Data Logger* Limited Lifetime Warranty | Digital Oscilloscopes |
|
|
|
GW INSTEK GTL-105 | Features Max. Current 3AFor: GPR-U/H/M Series,GPC/GPS/PPE/PPS/PPT/PSS/PST-Series | Accessories |
|
|
|
GW INSTEK GRS-6000A Series | Features * 50M/30MHz with 100MSa/s and 2 Channles * Equivalent Time Sampling of 500MSa/s max. * Acquire Mode : Peak Detect, Envelop, Persistence * Pre-Trigger Function 0 ~ 10 div * ROLL Mode to 100s/div * Waveform SAVE/RECALL 10 sets (REF0~REF9) * Max. Sweep Rate 10ns/div * Panel Setting SAVE/RECALL 10 sets (M0~M9) * RS-232C Interface | Real Time / Digital Storage Oscilloscope |
|
|
|
GW INSTEK GRF-1300 | Features - Waveform Support :* Sine Wave: 0.1 ~ 3MHz* Square Wave: 0.1 ~ 3MHz* Triangle Wave: 0.1 ~ 3MHz- RF Frequency : 870 ~ 920MHz- AM Modulation & FM Modulation- 5 On/Off Switches and 5 Test Points to Simulate 8 Failure Conditions for Trouble-Shooting Study- USB Interface to Provide Remote Control | RF Training Systems |
|
|
|
GW INSTEK GSP-930 | Features - Frequency Range: 9kHz ~ 3GHz- High Frequency Stability: 25ppb (0.025ppm)- RBW: 10Hz ~ 10kHz in 1-3 steps, 10kHz ~ 1MHz in 10% adjustable steps- Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset- Built-in Measurement Functions: Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO- Built-in Spectrogram and Topographic Display Modes- Gate Sweep Function- 1Hz Resolution Marker Counter- AM/FM Demodulation Analysis- 886MHz IF Output for User’s Extended Applications- Various... | Spectrum Analyzers |
|
|
|
GAS DNA PIR550 Non-Contact Portable Infrared thermometer | The thermometer is a non-contact infrared thermometer. It can measure from -60 to 550 ℃ (-76~1022 ºF) in the distance of 75:1 DS (Distance to Spot) ratio There are many mathematical modes for the Infrared function | Portable Infrared thermometer |
|
|
|
GW INSTEK ADP-001 | Features: * 50 ohms, BNC(J/F) - N(P/M)* For : GSP-Series | Adaptors |
|
|
|
GAS DNA DA-50 Series SMART Gas Detector/Transmitter(4~20mA) with built-in LCD | DA-50 detects various combustible & toxic gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. DA-50 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more... | Gas Detector |
|
|
|
GW INSTEK LCR-8000G Series | Features: ※ Wide Test Frequency 20Hz ~ 10/5/1MHz ※ 0.1% Basic Accuracy & 6 Digits Measurement Resolution ※ Large LCD Display with Intuitive Interface※ Full Measuring Functions with DUT V/I Monitor※ PASS/FAIL Function ( abs, % or delta) with Judgment Alarm※ DC Resistance Measurement ※ Multiple Step Mode※ Standard RS-232C/GPIB Interface※ Optional DC Bias box | LCR Meters |
|
|
|
GW INSTEK APS-1102A | Features : - 5.7" Large LCD Display- Output Capacity: 1kVA(for AC 200V Input)- Output Modes: AC and AC+DC Combined with any of four signal sources- Signal Source: Internal(INT),External(EXT),Internal+Externl(ADD)and Sychronization(SYNC)- Arbitrary Waveform Power Output- Power Amplifier of External Signal- Measurement Functions: Voltage, Current, Power ,Frequency, PowerFactor,CF,and Harmonic Current- Capacitor Input Load Supported- Sequence Function Allows Programming of Output Patterns-... | Programmable AC / DC Power Source |
|
|
|
GW INSTEK GW INSTEK GLA-1000 Series | Features * 32/16 Input Channel * Time Analysis : Up to 200MHz Internal Sampling Rate * State Analysis : Up to 100MHz External Input Clock * Memory Depth : Up to 2Mbits/1Mbits (Half/Full Channels) * Enable Qualifier : High/Low Level Enable and Enable Delay Function * Signal Analyzer : I2C, RS-232C Protocol Analyzer and Signal Statistics * File Export : Signal Data, Operation Setting and Display Image * USB 2.0 Supported(1.1 Compatible) | Logic Analyzers |
|
|
|
GW INSTEK PEL-3000 Series | Features : -Operating voltage (DC)：1.5V~150V-Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV -Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)-Support of High Slew Rate：Max 16A/us-Run Program Function（GO/NO GO Test）-Sequence Function for High Efficient Load Simulations-Commands are compatible with Kikusui PLZ-4W model.-Dynamic(Switching) Function：0.0166Hz ~20kHz-Soft Start Function：Off / On(1~200ms, Res：1ms)-Adjustable OCP / OVP / OPP / UVP Setting... | Programmable DC Electronic Load |
|
|
|
GAS DNA DI-20 Multi-input indicator | DI-20 has built-in high performance A/D converter & micro-processor which enable multi input signals, output signal transmission, communication, and alarm | Indicator |
|