Load current clamp sensor
Applicable model |
5010/5020 (*), 6300, 6305, 6310, 6315 |
* | When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors. |
Conductor size | Φ24 |
Rated current | AC 100A |
Output voltage | AC 500mV/100A (AC 5mV/A) |
Accuracy | |±0.5%rdg±0.1mV (50/60Hz) |±1.0%rdg±0.2mV (40Hz~1kHz) |
Phase Shift | within ±2.0º (45~65Hz) |
Withstand voltage | AC 3540V for 5 seconds |
Cable length | Approx. 3m |
Output connector | MINI DIN 6pin |
Operating temperature ranges | 0~50ºC, less than 85% RH (without condensation) |
Output impedance | Approx. 10Ω |
Applicable standards | IEC 61010-1:2001, IEC 61010-2-032:2002 CAT.III 300V pollution degree 2 |
Dimensions | 100(L) x 60(W) x 26(D) mm |
Weight | Approx. 160g |
Accessories | 9095 (Portable case), Instruction manual, Cable marker |
Option | 7146 (Banana Φ4 adjuster plug) 7185 (Extension Cable) |