|
Kyoritsu 6202
|
|
The Model 6202 is a hand-held portable appliance tester, performing four functions to ensure the Safety of Class I, Class II and Class III 230V appliances. And also can measure the mains voltage.Readings are displayed on a large liquid crystal display (LCD) below which are eight LEDs which unambiguously display a pass or fail indication for threshold values dictated by DIN VDE 0701/0702 |
Portable Appliance Testers
|
|
|
Kyoritsu 6305
|
|
Comprehensive real-time monitoring, recording and analysis of single and 3-phase systems
•
Voltage, Current, Power Factor and Frequency measurements
•
Power analysis (Active, Apparent and Reactive power)
•
Energy analysis (Active, Apparent and Reactive power)
•
Active power accuracy: ±0.3%rdg±0.2%f.s.
•
Automatic wiring check function to prevent incorrect connections
•
Large memory capability (2GB) using built-in SD card... |
Power Meter
|
|
|
Kyoritsu 6315
|
|
Simultaneous Power & Power quality measurementsPower/ Harmonics/ Waveform/ Power quality are recorded at all CHs. (Voltage: 3ch, Current 4ch)
•
Helpful support functionsQuick Start Guide, Wiring check and Sensor detection for easy and reliable measurement
•
Measurement with high accuracy
Guaranteed accuracy:
±0.3%rdg (energy),±0.2%rdg (voltage/ current)
Complies with the International Standard IEC 61000-4-30 Class Sand the... |
Power Meter
|
|
|
Kyoritsu 6300
|
|
12 kinds of power measurements
Voltage (RMS), Current (RMS), active power, apparent power, reactive power, active energy, apparent energy, reactive energy, power factor (cos θ), frequency , demand measurement, current flowing on the neutral line(Only on 3 phase 4 wire measurement)
Regenerative electric power can be measured
Detection of consumption power and regenerative electric power Regenerative electric power: This is the electric power which is generated... |
Power Meter
|
|
|
Kyoritsu 6310
|
|
Can measure Flicker in accordance to IEC 61000-4-15 and EN50160 standards. Using our Flicker sensor, available as optional accessory, Pst value (short term severity in 10 minutes value) and the Plt value (long term severity in 2 hours value) can be measured.
•
12 kinds of Power Measurements for Power Control and Applicable to Power Quality Control including Harmonics Analysis.
•
One click easy-to-use operation helps complicated setting and processing of large data through... |
Power Meter
|
|
|
Kyoritsu 8325F
|
|
Flicker Sensor
Can measure Flicker in combination with KEW6310.
For use with following model
6310
|
Power Meter
|
|
|
Kyoritsu 8128
|
|
Load current clamp sensor
Applicable model 5010/5020, 6300, 6305, 6310, 6315 |
Power Meter
|
|
|
Kyoritsu 8127
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
Kyoritsu 8126
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
Kyoritsu 8125
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
Kyoritsu 8124
|
|
Load current clamp sensor
Applicable model 5010/5020, 6300, 6305, 6310, 6315 |
Power Meter
|
|
|
Kyoritsu 8115
|
|
Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
•
Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8006
|
|
AC CLAMP ADAPTOR
•
Model 8006 is designed to measure AC current up to1500A.
•
It can accommodate up to 60mm-dia conductor or 50mm by 75mm bus-bar.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8112
|
|
AC CLAMP ADAPTOR
•
Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters. Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8112BNC
|
|
AC CLAMP ADAPTOR Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112. |
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8113
|
|
AC/DC CLAMP ADAPTOR
•
Model 8113 is a clamp-on AC/DC current/voltage converter that permits AC/DC current measurements from 1mA to 200A in conjunction with a voltmeter having 0.1mV resolution.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 8008
|
|
Multi-Trans
How to Use Clamp your instrument around the pick-up coil of the multi-tran. Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below. Multiply the reading of your clamp meter by 10 to obtain the current value measured. |
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu Discontinued products
|
|
MODEL
Descriptions
Remark
Alternative
1007
Digital Multimeter
1009
1008
Digital Multimeter
1009
1010
Solar Pocket Tester
Solar battery
No
1015
Digital Multimeter
1018
1017
Digital Multimeter
1018
1020
Digital Multimeter
Automatic mode switchingbetween AC and DC voltage measurements.
No
1103
Analogue Multimeter
1110
1104
Analogue Multimeter
with 1000V range and10A... |
Discontinued products
|
|
|
Kyoritsu 2012R
|
|
Kyoritsu 2012R
Innovative Multhimeters with current measurements up to 120A AC/DC
•
Unique Open Jaw technology for AC/DC current measurements
•
Very compact and as reliable as a tradictional full size multimeter
|
Digital Multimeter with AC/DC Clamp Sensor
|
|
|
Kyoritsu KEW MATE 2000
|
|
Capable of measuring AC and DC currents up to 60A with OPEN CLAMP SENSOR.
•
3400 counts with bargraph display.
•
Pocket size and heavy duty design.
|
Digital Multimeter with AC/DC Clamp Sensor
|
|