|
TIM001-TT100SV2 DIGITAL ULTRASONIC THICKNESS GAUGE FOR METALLIC/NON-METALLIC MATERIALS-1.20MM - 225.0MM
|
|
The TIM001is the most popular ultrasonic thickness gauge sold in Australia. It is a low cost, hand-held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastic, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces. |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
TIM006A-5MHz 8mm Probe Transducer Sensor for Ultrasonic Thickness Gauge Meter
|
|
Introduction:Name: Probe for Ultrasonic Thickness GaugeModel: PT-08 (Lemo 00 connector)Frequency: 5MHzDiameter of the contact proportion: 8mmMeasuring Range: 0.8mm-300.0mmAvaliable Contact Temperature: ﹣10ºC-60ºCApplicaiton: use for all Ultrasonic thickness gauge |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
TIM001B-ENHANCED DIGITAL ULTRASONIC THICKNESS GAUGE FOR METAL/NON-METAL MATERIALS-0.75MM~225.0MM
|
|
1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.
2. Transducer models are available for special application, including for coarse grain material and high temperature applications.
3. Probe-Zero function, Sound-Velocity-Calibration function.
4. Two-Point Calibration function.
5.Coupling status Indicator showing the coupling status.
6. Battery information... |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
TMT101A-ADVANCED GRAPHICAL ULTRASONIC THICKNESS GAUGE (A-SCAN SNAPSHOT + THROUGH -PAINT FUNCTION)
|
|
Color 320x240 Pixels Display A-Scan Snapshot
Echo-Echo Mode(Thru Paint & Coatings)
Stores 100,000 Readings Gain: Low, Medium or High for varying test conditions |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
TMT102A-ADVANCED GRAPHICAL ULTRASONIC THICKNESS GAUGE (Live Color A-Scan +Time-based B-Scan + Through -paint function)
|
|
*Color OLED 320x240 Pixels Display
*Live Simultaneous Color A-Scan and Thickness Display
*Control of Gain, Blanking, Gate, Range, Delay, RF and Rectify Modes
*Time-based B-Scan Display
*Echo-Echo Mode,Thru Paint & Coatings |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
CYG001-CYGNUS DIVE WRIST-MOUNTED UNDER WATER ULTRASONIC THICKNESS GAUGE
|
|
With its bright, very large, AMOLED display the Cygnus DIVE is simple to operate, providing accurate and reliable thickness measurements, underwater. Depth rated to 300 metres.
Available with data logging, topside, HelmetView™ and twin crystal probe options.
MSI™ Measurement Stability Indicator - this is a feature exclusive to the Cygnus. When using the DIVE Gauge in Single Echo mode, MSI™ confirms when a reading is stable by turning the thickness measurement numbers from red to... |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
CYG002-CYGNUS 1 UNDERWATER ULTRASONIC THICKNESS GAUGE
|
|
The Cygnus Underwater is the original diver held subsea multiple echo Ultrasonic Thickness Gauge. It was designed for use by divers undertaking subsea maintenance and surveys 3 decades ago… and today it is still the industry standard.
The unit is depth rated to 300 metres and it provides an accurate metal thickness measurement through coatings up to 20mm thick. The bright LED display ensures easy viewing even in poor visibility conditions.
The Underwater Thickness Gauge is supplied ready to... |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
TMT109-HIGH PRECISION ULTRASONIC THICKNESS GAUGE(0.15mm – 20.0mm)
|
|
HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch
MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch
DISPLAY UNITS : IMPERIAL and METRIC
AUTOMATIC SELF CALIBRATION
COUPLANT INDICATOR
AUTOMATIC POWER OFF DEVICE
HIGH-LOW LIMIT ALARM
LCD BRIGHTNESS ADJUST
LOW BATTERY INDICTOR
TECHNICAL SPECIFICATIONS:
Measuring Range (for steel)
Interface-Echo Mode: (I-E or Standard Mode)
1.50mm – 20.0mm (0.059in – 0.787 in)
Echo-Echo Mode: (E-E or High... |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
TMT109-High Precision Ultrasonic Thickness Gauge
|
|
HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch
MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch
DISPLAY UNITS : IMPERIAL and METRIC
AUTOMATIC SELF CALIBRATION
COUPLANT INDICATOR
AUTOMATIC POWER OFF DEVICE
HIGH-LOW LIMIT ALARM
LCD BRIGHTNESS ADJUST
LOW BATTERY INDICATOR
STANDARD DELIVERY:
Main Processor with Calibration block (4.00 mm)
Precision Probe (D11R) with Replaceable Delay Tip
Coupling Paste
Operation Manual
Consumer-Type 2 AA Type Alkaline... |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
CIA012-Basic Ultrasonic Thickness Gauge
|
|
Product Description
Auto Calibration to assure the accuracy
Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer
Use ▲ and ▼ keys to make a quick adjustment for the sound velocity/thickness and a quick recall to the stored data
Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not
10 thickness measurement storage and recall function available, which... |
Metal/Non-metal thickness gauges (ultrasonic)
|
|
|
TIM001C-DIGITAL ULTRASONIC THICKNESS GAUGE FOR METAL/NON-METAL MATERIALS-0.75MM~225.0MM-W SOFTWARE
|
|
Features
1.Capable of performing measurements on a wide range of material,
including metals, plastic, ceramics, composites, epoxies, glass and
other ultrasonic wave well-conductive materials.
2.Transducer models are available for special application, including for coarse grain material and high temperature applications.
3.Probe-Zero function, Sound-Veloctiy-Calibration function.
4.Two-Point Calibration function.
5.Coupling status Indicator showing the coupling status.
6.Battery... |
Metal/Non-metal thickness gauges (ultrasonic)
|
|